← Back to 10. Programmable Keyboard and Display Interface: 8279

πŸ“ Display Modes of 8279

πŸ“– From An Introduction To Microprocessor 8085 β€’ 10. Programmable Keyboard and Display Interface: 8279 β€’ 6 questions available

Practice MCQs for Display Modes of 8279. Test your knowledge with carefully crafted questions across easy, medium, and hard difficulty levels.

πŸ”„ Last updated: 2026-07-30

1
Easy Questions
3
Medium Questions
2
Hard Questions

πŸ“ Sample Questions

Q1. Which pin on the 8253 is designated as the Chip Select (CS) terminal?

πŸ”Ή A. Pin 21
πŸ”Ή B. Pin 22
πŸ”Ή C. Pin 23
πŸ”Ή D. Pin 24

πŸ’‘ Difficulty: easy | βœ… Correct: A

Q2. A microcontroller needs to read the current count value from counter 2 of an 8253. Which combination of control signals (CS, RD, WR, A1, A0) should be asserted?

πŸ”Ή A. CS=0 RD=0 WR=1 A1=1 A0=1
πŸ”Ή B. CS=0 RD=0 WR=1 A1=1 A0=0
πŸ”Ή C. CS=0 RD=1 WR=0 A1=1 A0=0
πŸ”Ή D. CS=1 RD=0 WR=1 A1=1 A0=0

πŸ’‘ Difficulty: medium | βœ… Correct: B

Q3. Why are the CS, RD, and WR inputs of the 8253 defined as active‑low signals in typical microprocessor interfacing?

πŸ”Ή A. Because microprocessors only generate low voltages
πŸ”Ή B. To simplify wiring and reduce power consumption
πŸ”Ή C. To provide noise immunity and allow wired‑AND bus structures
πŸ”Ή D. Because high levels could damage the chip

πŸ’‘ Difficulty: hard | βœ… Correct: B

⬆️ View all questions in the quiz below

πŸ”— Related Topics

πŸ“ INTEL Programmable Keyboard/Display Interface 8279πŸ“ Block Diagram of 8279πŸ“ Functional Description of 8279πŸ“ Key Board San of 8279πŸ“ Scanned Keyboard of 8279
πŸš€ Start Quiz πŸ“ Practice Mode