← Back to 7. Interrupt Instructions of 8085

📝 I/O Mapped I/O or Isolated I/O in 8085 Microprocessor

📖 From An Introduction To Microprocessor 8085 • 7. Interrupt Instructions of 8085 • 10 questions available

Practice MCQs for I/O Mapped I/O or Isolated I/O in 8085 Microprocessor. Test your knowledge with carefully crafted questions across easy, medium, and hard difficulty levels.

🔄 Last updated: 2026-07-30

2
Easy Questions
5
Medium Questions
3
Hard Questions

📝 Sample Questions

Q1. Given N = 03H stored at 2100H and the three bytes 34H, A5H, 00H at addresses 2101H-2103H (LSB at 2101H), after the program finishes, what value will be stored at memory location 2202H?

🔹 A. 34H
🔹 B. 5AH
🔹 C. A5H
🔹 D. FFH

💡 Difficulty: easy | ✅ Correct: B

Q2. To modify the program so it produces the 1's complement of each byte instead of the 2's complement, which instruction should be replaced?

🔹 A. Replace CMA with XRA A
🔹 B. Replace ADI 01H with NOP
🔹 C. Replace STAX D with MOV M,A
🔹 D. Replace JNC NXT with JC NXT

💡 Difficulty: medium | ✅ Correct: B

Q3. When N = FFH (255 bytes), which of the following problems is most likely to occur because the program does not check the end of memory space?

🔹 A. Overwrite data beyond 22FFH causing loss of other program
🔹 B. Program will halt due to stack overflow
🔹 C. Carry flag will always be cleared
🔹 D. No problem because 8085 has unlimited memory

💡 Difficulty: hard | ✅ Correct: A

⬆️ View all questions in the quiz below

🔗 Related Topics

📝 Memory Mapped I/O in 8085 Microprocessor📝 Data Transfer Schemes in 8085 Microprocessor📝 Programmed I/O Data Transfer in 8085 Microprocessor📝 Interrupt Driven I/O Data Transfer in 8085 Microprocessor📝 Direct Memory Access (DMA) Data Transfer in 8085 Microprocessor
🚀 Start Quiz 📝 Practice Mode